What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 30.06.2025 09:00

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There are two important concepts here.
A circuit breaker is similar, but is resettable.
2024–10–14 [Omar Gharbi Omar Gharbi ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Upvotes:
Culpa nobis molestiae ab dignissimos omnis nesciunt.
The bolt then partially travels down the line to your home.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
First Galaxy Buds Core image reveals a lack of premium design - SamMobile
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
David Ortiz rips Rafael Devers — ‘You disrespected yourself’ - MassLive
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
a photo is worth a thousand words.
Tesla after Trump - Financial Times
eight
I post the exact comment here.
There are three different concepts here that are getting confused.
Clint Eastwood Shades Era of Remakes: Do Something New or Stay at Home - Variety
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Famous 'ice-age puppies' are not actually dogs, according to new study - Earth.com
Here is a simplified AC power diagram.
[image of Common-mode choke]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Why is there so much evil in the world?
First Sentence:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What does a fuse do?
It seems Mohan does not understand the difference between a comment and an Answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
the problem then depends on "how fast does the fuse operate?".
What is the most interesting question you can ask to get to know someone?
One is “what exactly is in a ‘surge protector’ ? ”
What is lightning?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.
For this case there are devices called Metal oxide varistors (MOV).
Hailey Bieber Steps Out Solo in an Emerald Minidress After Ditching Her Wedding Ring - instyle.com
[old diagram got deleted by accident]
At least they know the answer if they wanted it.
The MOV will conduct when the voltage exceeds 50% of line voltage.
(Dc diagram shown, AC is similar).
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
All-time great wrestler Hakuho quits Japan Sumo Association with plans to form global body - AP News
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then describes the function of a fuse.
2024–10–10[John johnson John Johnson ]
This is where the MOV conducts again, and dissipated the energy.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
but I think this circuit , shows a few more pieces.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But… the neutral is now “floating” because of the 1 ohm resistance.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The third is lightning and “how it gets conducted into a home.”
2024–10–16 [ OO OLAOYE OYEBODE ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
An AC voltage/ current source, and an ac inductive load.
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Now when you have a certain ac resistance, then a current flows in a loop.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The other is “what does a “fuse” do?”
These are simplified answers to the original question, and does not change anything I wrote above.
At one ohm, the resistor has a maximum of 1 watt power.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Barnstars:
One
nine
He then asserts :
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is 'the assistant's answer'
In schematic diagrams this is the symbol for a fuse:
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This one hit behind the barn.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Edit 2024–10.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, what happens?